Deutsch
 
Datenschutzhinweis Impressum
  DetailsucheBrowse

Datensatz

DATENSATZ AKTIONENEXPORT

Freigegeben

Zeitschriftenartikel

Interpreting Multistage Minifrac Tests Using Discrete Element Modeling of Foliated Rock with Various Drilling Mud Properties

Urheber*innen
/persons/resource/farkas

Farkas,  Marton Pal
2.6 Seismic Hazard and Stress Field, 2.0 Geophysics, Departments, GFZ Publication Database, Deutsches GeoForschungsZentrum;

Dankó,  Gyula
External Organizations;

/persons/resource/jsyoon

Yoon,  J.-S.
2.6 Seismic Hazard and Stress Field, 2.0 Geophysics, Departments, GFZ Publication Database, Deutsches GeoForschungsZentrum;

/persons/resource/zang

Zang,  Arno
2.6 Seismic Hazard and Stress Field, 2.0 Geophysics, Departments, GFZ Publication Database, Deutsches GeoForschungsZentrum;

/persons/resource/zimm

Zimmermann,  G.
6.2 Geothermal Energy Systems, 6.0 Geotechnologies, Departments, GFZ Publication Database, Deutsches GeoForschungsZentrum;

/persons/resource/ove

Stephansson,  Ove
2.6 Seismic Hazard and Stress Field, 2.0 Geophysics, Departments, GFZ Publication Database, Deutsches GeoForschungsZentrum;

Externe Ressourcen
Es sind keine externen Ressourcen hinterlegt
Volltexte (frei zugänglich)

2322888.pdf
(Verlagsversion), 433KB

Ergänzendes Material (frei zugänglich)
Es sind keine frei zugänglichen Ergänzenden Materialien verfügbar
Zitation

Farkas, M. P., Dankó, G., Yoon, J.-S., Zang, A., Zimmermann, G., Stephansson, O. (2017): Interpreting Multistage Minifrac Tests Using Discrete Element Modeling of Foliated Rock with Various Drilling Mud Properties. - Procedia Engineering, 191, 233-241.
https://doi.org/10.1016/j.proeng.2017.05.176


Zitierlink: https://gfzpublic.gfz-potsdam.de/pubman/item/item_2322888
Zusammenfassung
Multistage mini hydraulic fracturing tests were performed in a borehole located in central Hungary in order to determine in-situ stress. At depth of about 500 to 560 meters, observed pressure versus time curve in metamorphic rock (mica schist) show a typical results. After each pressurization cycle, the fracture breakdown pressure in the first fracturing cycle is lower than the reopening pressures in the subsequent reopening and step-rate phases. It is assumed that the composition of the drilling mud and observed foliation of the mica schist have a significant influence on the pressure values. In order to investigate this problem, numerical modeling was performed using the discrete element code (ITASCA Particle Flow Code, PFC), which has been proven as an effective tool to investigate rock engineering problems associated with hydraulic fracturing. The code presented in this study enables simulating hydro-mechanically coupled fluid flow in crystalline rock with low porosity and pre-existing fractures (represented by the smooth joint contact model in PFC) in two dimensions. In this study, the sensitivity of the effect of foliation angle and fluid viscosity on the peak pressure is tested. The anomalous characteristics of the pressure behavior are interpreted in that way that the drilling mud penetrates the sub-horizontal foliation plane, it clogs the plane of weakness and makes the opened fracture tight. Eventually, the process prevents leak-off from the opened fracture that might explain the increased fracture reopening pressure in subsequent cycles.