ausblenden:
Schlagwörter:
KTB, Kontinentale Tiefbohrung der Bundesrepublik Deutschland, German Continental Deep Drilling Program, ultradeep drilling, borehole measurements, downhole logging, wireline logging, downhole data, sonic, resistivity, gamma spectrum, density, porosity, spontaneous potential, magnetic susceptibility, logs
Zusammenfassung:
KTB Borehole Measurements Data
Gravimetry inside the borehole
Extensive borehole measurements were performed during the active drilling phase of the KTB pilot and main hole. The data report STR 21/03 KTB Borehole logging data contains the full description of the logging data given here. Please read it thoroughly to avoid inappropriate or wrong use of the data. The KTB borehole measurement data files contain the final processed versions of logging data from the two KTB boreholes:
• KTB-Oberpfalz VB (KTB Vorbohrung/Pilot Hole or KTB-VB)
• KTB-Oberpfalz HB (KTB Hauptbohrung/Main Hole or KTB-HB).
Here only the acronyms KTB-VB and KTB-HB are used. In total there are 145 data files from the KTB-VB and 239 data files from the KTB-HB. All logs were run in open hole unless noted otherwise (see the file header). The maximum logging depth was 4001 m in the KTB-VB and 9085 m in the KTB-HB.
The files of the Gravimetry measurements contain data from measurements made with a Lacoste-Romberg gravity meter sonde from the company EDCON, USA. The gravimetry logs are not depth corrected to the reference GR because the sonde had no GR sensor. The data are provided in ASCII format. Detailed descriptions are provided in the associated data report (STR 21/03, Kueck et al., 2021) and the KTB Borehole Measurements Catalog.
Acknkowledgements:
The GFZ German Research Centre for Geosciences, Potsdam, Germany, as successor of the KTB Project Management provides the logging data, which were obtained under grants RG8604, RG8803 and RG 9001 of the Federal Ministry of Research and Technology of Germany.
