Item

Abstract

In the framework of future decarbonization of the energy industry, the safe and effective storage of hydrogen is an important approach to add to a climate-friendly energy system. Until the development of sufficiently large electrical storage systems, the storage of hydrogen in the order of GWh to TWh is envisaged in salt caverns or porous geological formations with a gas-tight covering of salt or claystone. In order to calculate gas losses from these H2 storage facilities, the H2 diffusivity of the storage and cap rocks must be known. To determine the hydrogen diffusion rates in these rocks, an experimental set-up was designed, constructed and tested. The set-up comprises two gas chambers, separated by the rock sample under investigation with an exposed area of approximately 7 cm2. The driving force for gas migration through the rock sample from the hydrogen-containing feed gas chamber to the hydrogen-free permeate chamber is the chemical potential (concentration) gradient. With respect to hydrogen migration behaviour, hydrogen breakthrough times and hydrogen diffusion coefficients were determined for dry and wet Bentheimer sandstone, Werra rock salt and Opalinus clay samples. Breakthrough times varied between less than 1 h and 843 h. Based on concentration changes at the permeate side, hydrogen diffusion coefficients were derived ranging from 10−9 to 10−8 m2/s. The differences between the materials and the effect that wetted or water-saturated samples have higher hydrogen retention due to closed pores and microcracks were clearly shown. The experimental set-up proves to be a suitable approach to determine site-specific rock characteristics such as hydrogen diffusion coefficients and breakthrough times for natural geomaterials.